Hardware & app
On-device controls for a Signage frame: buttons, LEDs, power, and the InkJoy Frame app. Size, battery, and radio are on Hardware Specs. Pairing with ePaperFrame Link is on Getting started.
Buttons
| Button | Action | What happens |
|---|---|---|
| BUTTON | Long-press 3 seconds | Power on / off. First boot, or boot after reset, goes straight into pairing. |
| BUTTON | Press once | After 2 seconds, query network status (blue LED). |
| BUTTON | Double-click within 2 seconds | Re-enter pairing and refresh the pairing screen (failed or new Wi-Fi). |
| BUTTON | Double-click while already pairing | Exit pairing. |
| RESET | Press once (pinhole) | Factory reset. |
If the frame never shows the pairing screen: double-click BUTTON, or press RESET once, wait until all three LEDs go dark, then power on again.
LED colors
Red, green, and blue can each use steady, breathing, fast, or slow flash. When a new status arrives during charging, the later status wins.
| Color | Meaning |
|---|---|
| Red | Charging / power faults |
| Blue | Network |
| Green | Normal work and full charge |
| Orange | OTA |
| Display | Status | Notes |
|---|---|---|
| Red steady | Charging | Later statuses override this while still on charge. |
| Green steady | Fully charged | If power stays connected, the LED turns off after 2 hours. |
| Green steady | Normal / just powered on | Short-press keeps it on 15 s. Successful boot also holds 15 s. |
| Red fast flash | Power off | Two flashes on a successful shutdown. |
| Red 3 s on / 3 s off | Low battery (≤ 5%) | After each refresh, red flashes 30 s. |
| Red keeps flashing | Battery empty | Continues until the frame shuts down. |
| Blue 3 s on / 3 s off | Pairing | Success: blue steady 30 s then off. First pairing: LED 10 min (screen stays 20 min). Later pairing: LED 3 min then pairing closes. |
| Blue fast flash (0.5 s) | Network error | 30 seconds. |
| Green + blue slow alternate | Wrong Wi-Fi password | Five failures close pairing. |
| Orange steady | OTA | Off when the update finishes. |
| Red / blue / green alternate | Factory reset | Green flashes 3 times when done. After the initial still, the frame powers off. |
Low battery, power off, reset
Low battery. After a refresh, a low-battery mark can appear at the bottom of the panel. Charge the frame. Battery level is also on the app device page. Once charge is above 5%, the on-panel mark clears on the next refresh.
Power off. Long-press BUTTON about 3 seconds. Red flashes twice. The last still stays on the ePaper.
Reset. Poke the pinhole next to BUTTON once. LEDs cycle red / blue / green. When reset finishes the panel returns to the factory still and shuts down. If you are giving the frame away, also unbind it in the InkJoy Frame app: Personal Center → Settings.
InkJoy Frame app
The consumer app registers the same email you later use on CMS /app. It can pair over Bluetooth and send one photo without opening the web console.
- Install, open, Sign up on first use.
- Long-press the rear BUTTON 3 seconds. Green comes on, the panel flashes into pairing. Blue flashing on a 3-second cycle means pairing mode.
- Turn on phone Bluetooth. Tap + on the home page, stand near the frame, confirm the last four MAC digits, then enter Wi-Fi. Name the frame when pairing succeeds.
- The app opens Photo. Pick an album (top-left), shoot or choose a still, drag the preview, set landscape / portrait (top-right), then tap the arrow to send one image.
Pairing LEDs in the app flow:
- Blue steady 30 s then off — Wi-Fi connected.
- Blue fast flash 30 s — pairing failed.
- Green + blue slow alternate — wrong password (five tries close pairing).
CMS still owns multi-site groups, albums, slideshows, and campaigns. Use the app for first bind and a quick still; use CMS for the fleet.